Any state-of-the-art vessel carries a multitude of IT and OT (Operational Technology) equipment, that are not only inter-connected and communicating with each other, but more often than not, also in near-constant contact with the world beyond the ship, for example the Internet, vendor offices, or company headquarters. To take an example, in a cruise vessel the IT systems encompass all the hotel, entertainment and guest systems and servers, convenience features, wireless networks, television, telephony, and all the supporting infrastructure. While the OT – or marine – domain covers the integrated bridge, navigational equipment, HVAC, power and engine management systems, to name but a few.
“On-board communication networks have become the ’nervous system‘ of vessels’ integrated machinery,” says Mate J. Csorba, Principal Specialist, Marine Cybernetics Advisory DNV GL – Maritime. “A growing share of disruptions and down time in offshore operations can now be traced back to problems with networked equipment. Currently these are usually tackled by ad-hoc troubleshooting, which makes the testing and verification of these increasingly complex and often safety-critical systems ever more important.”
The purpose of a network health test is to evaluate the performance and integrity of a communication system at a given point of time, (i.e. “snapshotting”), but most importantly to detect any failures present, including but not limited to capacity problems, failing communication devices, misconfigurations, that can lead to off-hire. Control system communications on-board vessels are very often made up of the same building-blocks as land-based industrial control systems. However, some of the operational requirements are specific to the maritime environment and these need to be taken into account.
In the event that any issues are revealed, specific mitigating actions help to increase the overall robustness and resilience of the communication and control systems on-board the vessel. If such an action is not possible, this is still very beneficial as those responsible for the system are becoming fully aware of the real condition of the systems.
The overall aim, therefore, is to obtain the capability to examine if there are any intermittent errors and predict future failures such as any emerging network degradation, existing capacity or configuration problems, or other threats to the availability and integrity of the control system network being tested.
“We believe that with advanced technology-based assessments, our customer can reap significant savings. Having a comprehensive overview of the ‘health‘of the network on-board will allow owners to schedule preventive measures at convenient times, enable better maintenance planning and perhaps even result in extended lifespan of aging assets,” says Csorba.
The pilot project on board CMM’s vessel consisted of 46 tests covering Ethernet-based networks (control systems and auxiliary systems), CAN-bus connectivity (sensors and the alarm system), and a selection of DNV GL class rules addressing on-board communication networks. In practice this translated into a focus on the alarm monitoring system, the ballast water treatment system, the main engine shaft power and performance monitoring system, the main engine control and monitoring system, and auxiliary networks.
The testing was conducted mainly from the engine control room, the cargo control room, and the bridge. Active stress tests were used to verify whether the communication network is robust enough under specific failure scenarios, while passive measurements were employed to find indications of any potential problems and deviations from a system’s installation documentation.
“CMM’s vessel is new with modern IT equipment both in software and hardware, built in 2015, and it proved to be in a very good condition,” comments Nikolaos Kakalis, DNV GL’s Manager for R&D and Advisory Services in South East Europe and Middle East. “The results did not indicate any discrepancies, and as such were considered as an initial snapshot of the health of the vessel’s communication systems. This ‘healthy‘ snapshot can be used to quickly identify any changes or deviations and to aid troubleshooting if any issues are encountered with individual systems in the future,” says Kakalis.
“This was an important first step, and we are very grateful for CMM’s excellent cooperation on this test,” says Csorba. “Looking ahead in developing such concepts further, it is possible that we will be able to move to greater data collection by automated on-board sensors, which report on the system’s health between port stays, or enable remote access procedures which could allow us to do system tests from shore in more or less real time.”
“Greece is for us in DNV GL our third home market, after Germany and Norway,” says Nikolaos Kakalis. “And we are glad to introduce and co-develop advanced technology-based services with the Greek shipping community that will help our customers manage their risks in practice.”
We believe that with advanced technology-based assessments, our customer can reap significant savings. Having a comprehensive overview of the ‘health‘ of the network on-board will allow owners to schedule preventive measures at convenient times, enable better maintenance planning and perhaps even result in extended lifespan of aging assets.”
- Principal Specialist
- DNV GL - Maritime
Contact the author
Mate J Csorba
View other recently published articles
Sign up for the DNV GL - Maritime email update subscription service