View all services
Cases items found. If you can't find what you are looking for, please try our site search instead.
Implementing a retention of critical knowledge programme will help SGN secure its knowledge assets
Monitor, report and analyse a customers entire wind and solar portfolio
DNV GL equipped the customer with its Portfolio manager live system to monitor a portfolio across the USA.
Full power cable type test
DNV GL provided a range of market leading advisory services to an operational portfolio across the UK, France and Sweden.
Construction-ready design package for a utility-scale 208 MW PV plant.
Momentary and short-time short-circuit current tests
First-ever independent ultra-high-voltage component tests
An extended type test program
Lenders engineering review of a portfolio of ground-mounted PV plants.
Short-circuit performance tests
Short-circuit acceptance tests
Tested in accordance with IEEE Std. C37.23
Analyse the status and feasibility of two Concentrated Solar Power projects.
Short-circuit and switching performance tests
Complete type testing according to IEC 60255-1
Technical due diligence including construction monitoring for 4 PV plants in Ukraine.
Independent engineering support to the lenders for financing a PV project in South Africa.
Appraise and reinforce a control design basis for floating wind turbine technology.
Pioneering design with Sesam for fixed structures
Striving for excellence
Sustainable solutions with Safeti
ALE mines diamonds with Synergi Life
Increased attention for health and safety
Confirming the safety and reliability of turbines installed at one of Africa’s largest wind farms.
Objective is to determine the optimal mix of plants and improve performance by diversifying the plant mix and fuel selection.
2016 Global Innovation Project
Bonus scheme for more reports
Atkins on the job with Sesam
MET-CERTIFIED is an Interreg 2 Seas project under the programme priority “Low carbon technologies”. It aims to increase the adoption of insurable and therefore bankable marine energy projects in the 2 Seas region through the development of internationally recognised standards and certification schemes in the sector.
Review of technologies, the effects on electricity prices, market behaviour and future grid operations
Uses Nauticus Machinery software for innovative design
The total program savings count up to 1.5 TWh electricity and 194 million m3 natural gas
Capital expenditure assessment of the water and electricity transmission and distribution companies.
Cascade software has been serving utilities for over 16 years
Wind farm repowering energy assessment leading to low uncertainty level
Uses Sesam software for strength analysis, including hydrodynamic, structure and fatigue
A 325 kilometres long HVDC cable with 700 MW capacity between the Netherlands and Denmark
Minimizing intervention time by safely maximizing personnel numbers
The program has paid more than USD 225.1 million in incentives and saved more than 3,331 GWh.
ABB main frequency converter for offshore wind turbines
eologix pioneering ice sensor system
Ingeteam frequency converter for on- and offshore wind turbines
Design evaluation for a 2.5 MW wind turbine designed by Goldwind
Battery fires are less toxic than plastics fires
operational risk management
Develop an engineering/cost model which provides conceptual design and analysis services.
2016 Joint Industry Project
Safeti vital in securing future of Danish plant
Under pressure to manage operating expenditure, which has been further aggravated by the drop in oil price, rig operators are feeling the pinch in their budgets for oil field services. DNV GL’s Captain Jonathan Mills explains how technology and early support from third-party experts can play a key role in safe and cost-efficient rig moving and warranty services.
Security assessment of two operational SCADA systems
North American Electric Reliability Corporation critical infrastructure protection
Complete type testing according to IEC 62052-11 and IEC 62053-21
Peak withstand current test of 850 kA and 842 kA
Highly visual and fully interactive reports allow detailed investigation of program trends.
Design verification of 2501 A and 1251 A panels.
Liander and Enexis use DNV GL’s Smart Cable Guard and improve grid reliability
Interview with Denny Harmsen, Senior Consultant at Alliander Asset Management.
DNV GL provided a diverse range of market leading advisory services during the development of the East Anglia ONE offshore wind farm.
Developing an effective regulatory regime to foster ESCO development and establishment in Dubai.
Faster compliance and identification of issues at a lower cost
Unique insights into how the power and water is delivered and used
Study all possible options to meet current and future demand of electricity and water production using only the current gas quantities by minimising gas utilisation.
Savings of more than 5,000 GWh electricity and 13 million Mcf (370,000 m3) natural gas
Setting the right priorities for reducing its energy losses
Battery storage and demand response could create savings and maintain the security of supply
ENI takes control with RAM analysis
Reconsideration of the risks posed to the environment
Replacing the majority of electricity meters with smart meters in Turkey
2016 was the first year a 700+ kV transformer underwent a full short-circuit test in our KEMA Laboratory
The study demonstrates the commercial and technical feasibility of the offshore wind market In India.
Review and approve design documents for the Oceade™ 18 – 1.4 MW tidal turbines
Knowing sensors, data and how to maximize reliability in cable networks.
Building a framework to focus the organizational alignment
Frazer-Nash expands with Sesam
Pioneering designs use Sesam
Temperature-rise test at 6300 A current.
Water distribution network simulation
Reducing risk with Synergi Life
Conformity statement for ATEPS battery system
ACCIONA receives the world’s first grid-scale energy storage certificate by DNV GL
Best RBI solution for GS Caltex
Uses Nauticus Machinery software for shaft alignment.
HHM relies on Nauticus Machinery
Breaking tests with a rated voltage of 24 kV.
A series of disconnectors has been tested according to IEC 62271-102
Demonstration of full-power DC fault clearing test
Assessment of suppliers capabilities to manage protection and control software development.
The Nuclear Decommissioning Authority faces an aging workforce and the risk of knowledge loss
ILF enters new area with Safeti
Data analytics of flow-based market coupling data to analyze transmission capacity and market prices during outages.
Integrate disturbance modelling improvements in linear control design script and verify.
DNV GL plays an integral role in SHE monitoring and assurance, supporting strategies to reduce contractor accidents and incidents, thereby reducing downtime and enhancing reputation
INPEX gains flexibility with Synergi Life
Technical concept guidelines for geothermal power projects
Support organizations with a customized roadmap to become compliant to this new ISO 9001 version.
QHSE improvements in transport
Maintaining the highest standard
Due diligence of a 43 MW wind, 15 MW of solar and 2 MW/4 MWh battery storage asset
Keppel trust in Sesam spans two decades
At the suggestion of its insurers the hospital consulted DNV GL about instituting an accreditation that both integrated a proactive risk-assessment methodology and performance-based standards to improve patient safety.
KOGAS brings in Maros and Taro for RAM analysis
Advising on a 400 kV Kenyan transmission line connecting one of Africa’s largest wind farms to the national grid.
Largest power transformer ever built in Gulf region
GRIDSTOR Recommended Practice to achieve quality level for the performance, safety and reliability
Providing technical advisory services for a large contingent of renewable energy IPPs on behalf of senior debt lenders.
Facing new aviation challenges
The Linde Group chose the flexibility and configurability of Synergi Life for the entire organization.
Four different types of transformers have been tested
Design verification of a 3000 A panel.
Complete type test of a 400 V / 4000 A panel
Efficiently lowering the risk of accidents
74 studies in different areas of the commercial and industrial program offerings have been conducted.
Five types of fuses have performed verification tests.
Technology and business impact analysis
Community center microgrid for resiliency
30 years with Synergi Electric
The Midstream program has made a significant contribution to LED market transformation in Chicago, Illinois.
Identify the hosting capacity where the Smart Home community was planned.
Assessing the new design capabilities of LiDAR assisted model predictive control (MPC) applied to wind turbines.
Third party services for NDC performance tests and supplementary tests concerning independent power producers representing 14 power plants.
Neste expands use of Synergi Life
2017 Global Innovation Project
Provide a conceptual design for a prospective organisational structure and future distribution operations
Take care 24 hours
North Sea pipeline operator, Gassco, had pipe-in-pipe bundle with 17 consecutive, interacting free spans with lengths of 65m-83m. A planned rock dump campaign was canceled based on findings from the Global Free Span service, which resulted in cost savings of 600-900k USD.
This export pipeline operated in the North Sea by Gassco had at several times been rock dumped based on previous recommendations from engineering companies. A total cost of 1.9-2.6 MUSD was demonstrated by the new Global Free Span Service to be unnecessary.
Securing Norwegian State Railways
Withstanding fire and explosion hazards
Offshore Design Engineering (ODE) is using Sesam for offshore wind turbine foundations
Type tests and an additional 3 second symmetrical short-circuit test of 1500 kVA
OMV at forefront of risk management
Technical due diligence and construction monitoring.
Safely reducing the length of annual shutdowns
2017 Global Innovation Project and Joint Industry Project
Sesam brings in new business
Moving ahead in the healthcare sector
5.5 GWh per year from one field at Castle Lloyd Farm in Pendine, Wales
A full-sized permanent magnet fault current limiter has successfully completed a range of testing.
A standard-setter in QHSE management
Phu Cuong 1 wind farm in Vietnam
Potential to reduce costs by more than 20%
Blackouts caused the shutdown of industrial plants leading to multimillion losses in revenues
A 80/100 MVA, 154/33.6 kV transformer has been tested.
The first European smart grid field trial
Improved process for review and approval of interconnection applications.
Improving quality and ensuring delivery times
Triple pioneering for optimal performance.
378 MW, 35 km northeast of Rügen Island in the Baltic Sea
A five and a half-storey house of steel
295 MW safe and reliable power generation
Grid code compliance needed to be proven.
100 MW certified solar power supply in Veltoor, Telangana, India
Knowing technologies, socio-economic analysis and how to assure project feasibility
Knowing major industry players and how to help them work towards a common goal
Synergi Life for Dutch rail safety
Effective incident analysis and reporting
Pulled from 40 qualification programs across 30 manufacturers
Providing quality assurance services for transitioning to a smart metering system, including two-way communication.
The role of quality infrastructure in boosting solar PV markets
Multiple measure projects are key drivers of deeper savings
Reliable, safe and fully controlled soft energisation after blackout extended to high-voltage grids
Efficient fleet management with ShipManager
Feasibility studies and conceptual design of wind farm and solar projects on small grids.
New, comprehensive and up-to-date DNV GL certification schemes for wind energy
Developing a sustainable energy infrastructure that stimulates economic growth and ultimately reduces poverty.
Direct purchase of solar and wind resource time series
DNV GL provides a powerful long-term methodology for Rijkswaterstaat
Advantage with ShipManager
Justifying operations without costly intervention
Proving safe operations
Risk mapping to unveil procedural weaknesses
Rolls Royce uses Nauticus Machinery software for shaft alignment
Saitec Offshore Technologies on new path with Sesam
County-wide emission reductions of 6.1% from 2005 to 2013
SBM Offshore uses Sesam for FPSO
The updated SCADA systems will monitor the sub-transmission network
Replacement of the legacy distribution management system by an advanced distribution management system
Sea and Land Project Consultants at forefront with Sesam
Fast offshore reporting
Supported 1 GW in eleven PV project portfolios globally
Complete type testing according to IEC 61850-3 and IEEE 1613
Independent engineering services for six of the seven PV solar power plants.
Commissioning support and performance testing of the 100 MW SHAMS CSP plant.
Synergi Life supports Shelf Drilling rigs
Maros and Taro - Prime tools for predicting performance
Ingeteam wind converter manufacturing facility, Spain
Providing pre-construction project development services to enhance power supply reliability and help fight climate change.
Safeti for QRA analysis
First choice for Skanska: Synergi Life
Assessing the current state, identifying the current vision and useful applicable smarter technologies.
Conformance and interoperability testing for the deployment of 27 million smart meters in Spain until 2018.
Independent Engineering services for eleven solar photovoltaic power plants.
Holistic risk management for Statnett
Statoil makes it work globally with Synergi Life
Flexibility is key for Subsea 7
Taking control of the QHSE process
Saving millions with Synergi Plant - RBI
Striving for zero incidents
Pushing the testing facilities to its limits
Synergi Life by web, the fastest solution
A leader in health and safety with Phast
Accredited smart energy and cyber security testing
Third-party assessment of a novel energy storage technology
DNV GL conducted an in-depth analysis of the multiple benefits of PSH for the UK power system
Icing loss can greatly impact wind turbine performance.
Knowing power contribution from PV systems and how to manage risk through system testing on top of component testing
To accelerate the transition of Caribbean island economies from a heavy dependence on fossil fuels to renewable resources.
Establish a toolbox for the design and optimization of wind power station control strategies.
Consolidating the Total system
Advisory services for establishing a new state-of-the-art backup control centre and replacement of the existing load dispatch centre
Improve import capacity and provide reliable power to the area
Siemens 3.6 MW onshore direct drive platform
Adwen AD 5-135 is a reliable, efficient and high-performance 5 MW offshore wind turbine
Siemens new flagship 7 MW offshore wind turbine
The manufacturer received a type certificate allowing access to the grid.
Pioneering gravity-based OWT solutions using Sesam
Ulstein gives Synergi Project thumbs up
Short-time current withstand testing
Portfolio of 14 wind farms totalling around 230 MW
Assessment to determine whether alternative solutions are safe enough
Safety culture grows with Synergi Life
Integration of WindFarmer, our intuitive wind farm design tool, with an internal fatigue loads database (FLD).