WEBINAR

Virtual Workshop Series: Sesam Usfos

Boost your non-linear analysis capabilities
Progressive collapse analysis software for pushover and accidental analysis - Sesam's Usfos from DNV GL

Yes, I would like to watch the webinar video

Please leave your contact details

Offshore jacket structures have been used for building petroleum infrastructure for decades. The existing jackets are typically designed for a life of around 20 years. Improvements in oil recovery from several fields have increased the interest in using these structures well beyond their initial design life. Even though large re-constructions, repairs, and inspections have been performed, using existing installations beyond their design life will, in many cases, be economically preferable.

In this virtual workshop we showcase using GeniE/Sesam Usfos and best practices and tips and tricks to boost your non-linear analysis capabilities.

Workshop series overview:

Workshop 1 - Introduction to non-linear analysis

  • Create a model in GeniE
  • Run non-linear analysis in Usfos
  • Understand and inspect non-linear results

Workshop 2 - Introduction to collapse analysis of jacket structures

  • Create and execute collapse analysis using GeniE/Usfos
  • Add deformations & damaged members
  • Add ductility and fracture criterion
  • Execute Joint code checks

Workshop 3 - Introduction to boat/ship impact analysis and dynamic time domain analysis

  • Create Boat impact inputs and execute boat impact analysis
  • Execute multiple boat impact analysis
  • Perform a dropped object analysis

The workshop instructor is Abin Pulivelil, Principal Engineer. He has been working in the Design and fabrication of Offshore platforms since 2007. He holds a Master’s degree in Structural Engineering and an expert in the field of Finite Element and non-linear analysis of structures. Chris Kubes, Senior Engineer, will be on hand to support. Chris has been with DNV GL working as a software support engineer for floating structure design with DNV GL and has been in this position for the past 6 years. He graduated with an aerospace degree in 2002 and has worked in the aerospace and offshore fields as an engineer for the past 17 years.