Maritime

NA-03 Nauticus Hull rule check - latest generation modelling tool

Nauticus Hull rule check - introducing next generation modelling tool

The course is an introduction to the latest version of Nauticus Hull program for rule compliance checks

Description

Nauticus Hull is a ship structural analysis and design program for rule compliance checks on hull girder strength, and plate and stiffener scantling checks for a hull cross section.

The current version of the program, including a new scantlings modelling tool and a new approach for compartment definitions, was introduced in 2018.

The following rule sets are applicable in the latest program version:

  • DNV GL Rules
  • DNV GL offshore rules
  • IACS Common Structural Rules for Bulk Carriers and Oil Tankers (CSR BC & OT)
Focus in this course is how to use the program, i.e. on hands-on operation of the program, including scantlings modelling and running the rule compliance checks, see list of topics below. Notice that rule related topics are not covered in this course.

Learning objectives

After the course, you should be able to use Nauticus Hull to carry out compliance checks on the hull girder and cross sections according to rule requirements.

The following topics will be covered:

  • Describing ship particulars and main data
  • Describing tank plan, compartments and loads
  • Scantlings modelling
  • Prescriptive rule check analyses
  • Fatigue analyses
  • Report and results presentation

Target group

Naval architects, designers, hull structural engineers and approval engineers with no experience in using the latest version of Nauticus Hull for rule check analyses.

Nauticus Hull rule check - introducing next generation modelling tool

Contact us:

REGISTER HERE

Training offered on request

Request training

Duration:

1 day

Prerequisite:

Basic understanding of ship structures and hull strength. Knowledge about the frame analysis program 3D Beam, course NA-08, and the old version of Nauticus Hull, course NA-02, is an advantage, but not required.

Course:

NA-03 Nauticus Hull rule check - latest generation modelling tool

Description

Nauticus Hull is a ship structural analysis and design program for rule compliance checks on hull girder strength, and plate and stiffener scantling checks for a hull cross section.

The current version of the program, including a new scantlings modelling tool and a new approach for compartment definitions, was introduced in 2018.

The following rule sets are applicable in the latest program version:

  • DNV GL Rules
  • DNV GL offshore rules
  • IACS Common Structural Rules for Bulk Carriers and Oil Tankers (CSR BC & OT)
Focus in this course is how to use the program, i.e. on hands-on operation of the program, including scantlings modelling and running the rule compliance checks, see list of topics below. Notice that rule related topics are not covered in this course.

Learning objectives

After the course, you should be able to use Nauticus Hull to carry out compliance checks on the hull girder and cross sections according to rule requirements.

The following topics will be covered:

  • Describing ship particulars and main data
  • Describing tank plan, compartments and loads
  • Scantlings modelling
  • Prescriptive rule check analyses
  • Fatigue analyses
  • Report and results presentation

Target group

Naval architects, designers, hull structural engineers and approval engineers with no experience in using the latest version of Nauticus Hull for rule check analyses.

Nauticus Hull rule check - introducing next generation modelling tool

NA-03 Nauticus Hull rule check - latest generation modelling tool

REGISTER HERE