Maritime

NA-10 Nauticus Machinery shaft alignment basic training

NA-10 Nauticus Machinery shaft alignment basic training

The course covers the basic parts of Nauticus Machinery Shaft Alignment intended for shaft alignment in direct coupled or geared propulsion systems

Description

The course covers the basic parts of Nauticus Machinery Shaft Alignment intended for shaft alignment in direct coupled or geared propulsion systems.

The following topics are covered:

  • Basic geometry modelling, shaft- and bearing wizards
  • Applying materials, buoyancy corrections, loads
  • Modelling propeller, bearings, shrink fits, gears and engines
  • Calculation and reporting
  • Optimization and reverse engineering features
  • Verification methods such as gap/sag, strain gauge or hydraulic jacking

Learning objectives

We focus on use of the software in this basic course. It means that general theory or Classification Rules are not covered.
Throughout presentations and hands-on training you will learn how to use Nauticus Machinery Shaft Alignment effectively. The design, verification and troubleshooting (“reverse engineering”) aspects will be covered. You will also learn how to optimize the alignment using the more advanced features of the software.

Target group

Naval architects, designers, ship yards and approval engineers with no or limited experience using Nauticus Machinery.

Contact us:

REGISTER HERE

Training offered on request

Request training

Duration:

1 day

Prerequisite:

Some understanding of shaft alignment analysis and verification methods.

Course:

NA-10 Nauticus Machinery shaft alignment basic

Description

The course covers the basic parts of Nauticus Machinery Shaft Alignment intended for shaft alignment in direct coupled or geared propulsion systems.

The following topics are covered:

  • Basic geometry modelling, shaft- and bearing wizards
  • Applying materials, buoyancy corrections, loads
  • Modelling propeller, bearings, shrink fits, gears and engines
  • Calculation and reporting
  • Optimization and reverse engineering features
  • Verification methods such as gap/sag, strain gauge or hydraulic jacking

Learning objectives

We focus on use of the software in this basic course. It means that general theory or Classification Rules are not covered.
Throughout presentations and hands-on training you will learn how to use Nauticus Machinery Shaft Alignment effectively. The design, verification and troubleshooting (“reverse engineering”) aspects will be covered. You will also learn how to optimize the alignment using the more advanced features of the software.

Target group

Naval architects, designers, ship yards and approval engineers with no or limited experience using Nauticus Machinery.

NA-10 Nauticus Machinery shaft alignment basic training

REGISTER HERE