SY-26 Synergi Gas standard plus compressors

SY-26 Synergi Gas standard plus compressors training

This course is designed for engineers or experienced technicians who are responsible for the construction, design, analysis and operation of pressure-flow piping systems

This course is offered as classroom training, or as online training (see schedule below).

Description

This course is designed for engineers or experienced technicians who are responsible for the construction, design, analysis and operation of pressure-flow piping systems. Course material and examples focus on standard Synergi functionality, analysis of models, hydraulic theory and the operation of the physical components of a network. It is a perfect blend of lecture and hands-on workshops to ensure you take away the knowledge to effectively and efficiently use the product.

The following topics are covered:

  • Model settings
  • Workspaces and equipment warehouse
  • Basemaps
  • Reports
  • Exchange files and printing
  • Facility types discussed in detail include pipes, valves, and regulators

The compressor section of the course runs from the afternoon of the third day through lunchtime on the fourth day. This material includes theoretical compression, basic controls and unit selection, and reciprocating compressors in detail.If time allows, an overview of centrifugal compressor modelling may also be provided. You will take away a helpful binder full of the lecture slides and workshops to refer to at a later date, along with the training files on a flash drive.

Learning objectives

To gain both working and theoretical knowledge of Synergi Gas advanced hydraulic modelling software.

Target group

Engineers, planners, and technicians who will be using Synergi Gas to model natural gas networks and pipelines, especially with compression. In addition, managers will benefit from learning the program’s capabilities. Users who have had training on older versions of the software will find most of the course a review, but will benefit from hands-on work with the most recent release plus the ability to work through any lingering issues in a classroom environment.

CLASSROOM TRAINING AND ONLINE TRAINING

REGISTER HERE

When:

01 January 2020 - 31 December 2021

Add to calendar 2020/01/01 09:00 2021/12/31 18:00 SY-26 Synergi Gas standard plus compressors This course is designed for engineers or experienced technicians who are responsible for the construction, design, analysis and operation of pressure-flow piping systems
https://www.dnvgl.com/training/sy-26-synergi-gas-standard-plus-compressors-13002
This only adds the event to your calendar, please remember to register for this event.
false YYYY/MM/DD akeGphYOczrmtQTfhmEQ22349
Available dates and venues

Duration:

Classroom: 3.5 days, Online: 5 x 0.5 days

Prerequisite:

A basic level of proficiency in the Microsoft Windows environment is assumed. The number and relative experience levels of the attendees will dictate the speed and sometimes the content of the course.

Course:

SY-26 Synergi Gas standard plus compressors

This course is offered as classroom training, or as online training (see schedule below).

Description

This course is designed for engineers or experienced technicians who are responsible for the construction, design, analysis and operation of pressure-flow piping systems. Course material and examples focus on standard Synergi functionality, analysis of models, hydraulic theory and the operation of the physical components of a network. It is a perfect blend of lecture and hands-on workshops to ensure you take away the knowledge to effectively and efficiently use the product.

The following topics are covered:

  • Model settings
  • Workspaces and equipment warehouse
  • Basemaps
  • Reports
  • Exchange files and printing
  • Facility types discussed in detail include pipes, valves, and regulators

The compressor section of the course runs from the afternoon of the third day through lunchtime on the fourth day. This material includes theoretical compression, basic controls and unit selection, and reciprocating compressors in detail.If time allows, an overview of centrifugal compressor modelling may also be provided. You will take away a helpful binder full of the lecture slides and workshops to refer to at a later date, along with the training files on a flash drive.

Learning objectives

To gain both working and theoretical knowledge of Synergi Gas advanced hydraulic modelling software.

Target group

Engineers, planners, and technicians who will be using Synergi Gas to model natural gas networks and pipelines, especially with compression. In addition, managers will benefit from learning the program’s capabilities. Users who have had training on older versions of the software will find most of the course a review, but will benefit from hands-on work with the most recent release plus the ability to work through any lingering issues in a classroom environment.

Online training scheduled and on request. Available dates and venues for classroom training.

Dates Venue Register by Course fee Computer
Dates
ONLINE TRAINING:
Dates
Dates to be discussed
Venue
Online training
Course fee
Call to discuss
Computer
Attendees use their own PC with the latest software version installed
Dates
CLASSROOM TRAINING:
Dates
To be announced
Venue
To be announced
Register by
To be announced
Course fee
To be announced
Computer
To be announced

SY-26 Synergi Gas standard plus compressors training

REGISTER HERE