SY-32 Synergi Gas Distribution Modules

SY-32 Synergi Gas distribution module training

This course is a combination of a number of smaller courses. Sample data is used to go through the entire model building process, including clean-up and a look forwards at updating models.

This course is offered as classroom training, or as online training (see schedule below).

Description

This course is a combination of a number of smaller courses. Sample data is used to go through the entire model building process, including clean-up and a look forwards at updating models. You will start from an empty Oracle schema and proceed to import CIS data into CMM (Customer Management Module), generate and analyse loads, and assign customers to the model you just built. We will look at how to run isolation scenarios and generate lists of affected customers. Time permitting we will review how pipe sizing is done across a network and what kinds of results are produced for regulator station overpressure protection. You will take away helpful course material.

Learning objectives

To gain a working and theoretical knowledge of the following Synergi Gas advanced hydraulic modelling software modules:

  • Model Builder
  • Facilities Management Module (FMM)
  • Customer Management Module (CMM)
  • Area Isolation Module (AIM)
  • Automated Design Module (ADM)
  • Regulator Station Module (RSM)

Target group

Users who have attended a Synergi Gas standard course and/or have extensive experience using Synergi Gas for network analysis and will be using the software to build and update low pressure distribution models from GIS data, generate customer loads, perform network isolation scenarios, design new networks, and/or prepare overpressure protection documentation for regulator station. Users who have experience with the modules in older versions, may find this class particularly useful, as the current version of Synergi Gas is always used in class.

CLASSROOM TRAINING AND ONLINE TRAINING

REGISTER HERE

When:

01 January 2020 - 31 December 2021

Add to calendar 2020/01/01 09:00 2021/12/31 18:00 SY-32 Synergi Gas Distribution Modules This course is a combination of a number of smaller courses. Sample data is used to go through the entire model building process, including clean-up and a look forwards at updating models.
https://www.dnvgl.com/training/sy-32-synergi-gas-distribution-modules-48013
This only adds the event to your calendar, please remember to register for this event.
false YYYY/MM/DD akeGphYOczrmtQTfhmEQ22349
Available dates and venues

Duration:

3 days

Prerequisite:

Significant experience as a Synergi Gas modeller and/or completion of SY-25 Synergi Gas standard course. Users should be proficient in the use of the latest version of Synergi Gas.

Course:

SY-32 Synergi Gas Distribution Modules

This course is offered as classroom training, or as online training (see schedule below).

Description

This course is a combination of a number of smaller courses. Sample data is used to go through the entire model building process, including clean-up and a look forwards at updating models. You will start from an empty Oracle schema and proceed to import CIS data into CMM (Customer Management Module), generate and analyse loads, and assign customers to the model you just built. We will look at how to run isolation scenarios and generate lists of affected customers. Time permitting we will review how pipe sizing is done across a network and what kinds of results are produced for regulator station overpressure protection. You will take away helpful course material.

Learning objectives

To gain a working and theoretical knowledge of the following Synergi Gas advanced hydraulic modelling software modules:

  • Model Builder
  • Facilities Management Module (FMM)
  • Customer Management Module (CMM)
  • Area Isolation Module (AIM)
  • Automated Design Module (ADM)
  • Regulator Station Module (RSM)

Target group

Users who have attended a Synergi Gas standard course and/or have extensive experience using Synergi Gas for network analysis and will be using the software to build and update low pressure distribution models from GIS data, generate customer loads, perform network isolation scenarios, design new networks, and/or prepare overpressure protection documentation for regulator station. Users who have experience with the modules in older versions, may find this class particularly useful, as the current version of Synergi Gas is always used in class.

Online training on request. Available dates and venues for classroom training.

Dates Venue Register by Course fee Computer
Dates
ONLINE TRAINING:
Dates
Dates to be discussed
Venue
ONLINE
Course fee
Call to discuss
Computer
Attendees use their own PC with the latest software version installed
Dates
CLASSROOM TRAINING:
Dates
To be announced
Venue
To be announced 
Register by
To be announced
Course fee
To be announced
Computer
To be announced

SY-32 Synergi Gas Distribution Modules

REGISTER HERE